WalkingPad P1 Review
Our Verdict
The WalkingPad P1 works well for everyday utilise, but don't bother with the remote
For
- Fairly inexpensive
- Fast setup
- Easy to utilize
Against
- Bulky
- No display
- Remote is glitchy
Tom's Guide Verdict
The WalkingPad P1 works well for everyday use, but don't carp with the remote
Pros
- +
Fairly cheap
- +
Fast setup
- +
Like shooting fish in a barrel to use
Cons
- -
Bulky
- -
No display
- -
Remote is glitchy
WalkingPad P1 specs
Price: $499
Surface size: 47 x xvi.five inches
Max speed: three.5 mph / half-dozen kph
Max load: 220 lbs / 100 kg
Net weight: 62 pounds
Motor: 1 HP
Touchscreen: No
Conditioning programs: No
Phone compatibility: iOS and Android
Walking pads have gained popularity through the pandemic as people have connected to piece of work from abode and avert going to a crowded gym. They accept up less infinite than a traditional treadmill, which means they'll fit nether a continuing desk-bound and let you get some steps while you piece of work. What they may lack in advanced features, such equally workout programs or the ability to incline, they make upwardly for in toll, with devices costing hundreds (not thousands) of dollars.
The WalkingPad P1 from Kingsmith is a lower-priced pick than the manufacturer'south WalkingPad A1Pro, which nosotros previously reviewed. The P1 doesn't have a display, the remote is confusing, and the motor is a scrap less powerful and a bit louder. But the price difference is plenty to make information technology worth considering.
Is it one of the best under-desk treadmills on the market? Read our full WalkingPad P1 review below.
WalkingPad P1 review: Cost and availability
The WalkingPad P1 has a standard cost of $499, which is $200 less than the WalkingPad A1Pro. It'southward the aforementioned cost as the manufacturer'southward WalkingPad C1, which has a less powerful motor (0.75 HP) but also weighs less (48.v pounds); the updated version, the C2, has a one HP motor, besides weighs 48.five pounds, goes for $529, features a brandish, and comes in six colors.
At $499, the P1 is at the lower stop of the price calibration for walking pads, which can range from less than $200 to more than $1,600. It'south likewise comparable to entry-level treadmills such equally the XTerra Fitness TR150, which has an MSRP of $649 but can be plant for less than $500 through third-party sellers.
WalkingPad P1 review: Unboxing and Setup
Like the A1Pro, the WalkingPad P1 volition make it at your doorstep in a sizable box: 8 x 25 x 36 inches and 68 pounds (31 kg). The device's net weight is 62 pounds (28 kg). Information technology's not as heavy as devices such as the LifeSpan TR800 ($849 and 96 pounds), but there are lighter options out there, such as the ChoSports 176TM ($199 and 37.5 pounds).
As I said in my WalkingPad A1Pro review, information technology's not a bad idea to get some assist to bear the P1 in the house, take information technology out of the box, and put it where you program to use it. Similar a lot of sizable electronics, the WalkingPad P1 comes with a adequately short ability cord (six feet), then you'll want to find a spot for it that's close to an electrical outlet.
Given the size of the device, I recommend advanced scouting of your business firm or apartment and so you lot know where you want to put it before information technology arrives. That will cut down on unnecessarily moving it from one spot to another, as that is a conditioning in and of itself. The WalkingPad P1 folds upwards and has two wheels built into the forepart, to help you store the device under a couch or bookcase, though given its bulk I simply left information technology where it was.
WalkingPad P1 review: Blueprint and use
There are three major differences between the WalkingPad P1 and the A1Pro. Offset, the less expensive P1 doesn't come with a display. Second, to make upwards for this, the remote is larger and comes with a minor screen. Third, the motor is 1 HP compared to 1.25 HP, and while it'south a bit louder than the A1Pro, I didn't find a difference in performance.
The lack of a display has both pros and cons. A display is a standard feature on every treadmill and on about walking pads. If you're used to glancing at a display to rapidly see your altitude, pace, and elapsed time, then the WalkingPad P1 may not come across your expectations.
On the other hand, looking down at your feet when you walk isn't practiced for your form. Plus, if you're using the WalkingPad P1 primarily to go in some extra steps during the workday or afterward the kids are in bed, then in that location's a decent chance you lot're not that concerned with your stats. That was the instance for me, then I didn't miss seeing the brandish at my feet.
The WalkingPad P1 remote is meant to make upwardly for the lack of the display, though it falls a bit short. The small-scale display on the device doesn't always stay on, presumably to salvage the battery. If you want to read the display, y'all have to striking the Offset/Stop push button — but if you're not conscientious, and yous hit this button a second time, the belt volition stop abruptly. This happened to me the get-go time I used the remote. Needless to say, it was an unpleasant surprise.
Information technology also takes the remote quite some time to establish a connectedness with the WalkingPad P1. The screen on the remote volition read "WAIT," and pressing the Start/Cease button but makes the remote beep. Meanwhile, If you start up the KS Fit app with your other manus, it'll connect to the P1 inside seconds and then prompt you to start the belt. I ended up non using the remote.
When the WalkingPad P1 is actually on, information technology works well. The belt is quiet, and every bit long equally you're not distracted, it'due south easy to keep walking correct in the center. That can get tricky if you use Automatic way, which speeds up or slows down the belt depending on your position. It's an interesting feature — it's essentially designed so you can control belt speed with your feet, without the remote or app — but it takes some getting used to, and if you slow down too quickly, the chugalug volition simply stop. This happened to me nearly two seconds into a walk. I opted for Manual mode the adjacent fourth dimension.
Every bit with the A1Pro, y'all have to walk ane km at 2.5 km per hour to "unlock" faster speeds too every bit Automatic mode, so be prepared for a tiresome walk to kicking things off. It's a skilful time to grab up on email, social media, or whatever testify you lot're binging.
WalkingPad P1 review: App
KS Fit, Kingsmith's app for managing its treadmills, walking pads, and smart dumbbells, doesn't get much dearest in the Google Play store. The app's rating is 1.four, and multiple reviewers written report that KS Fit not simply doesn't sync well with Google Fit but has trouble connecting with their Kingsmith devices as well.
When I wrote my WalkingPad A1Pro review, I faced like problems. More often than non, I had to re-sync the app with the device before starting a walk. There was too a fifty/l chance that the app wouldn't save a walk I had just done.
Kingsmith released a new version of the KS Fit app (v3.ix.v) on Dec. 10, and in my experience that seems to accept alleviated some of the syncing issues. With the WalkingPad P1, the app synced quickly and also saved every walk, including the day I did two walks in a row because the belt stopped when I inadvertently pressed Stop on the remote twice.
Given the performance of the remote that comes with the WalkingPad P1, I stuck with using the KS Fit app to command the device. The app works well enough for starting and stopping the belt. KS Fit will likewise run in the background on your phone while the WalkingPad P1 is running, then yous tin close the app and use other apps on your telephone while you're walking. It's besides not much of a battery suck, even on an older phone like my Samsung Galaxy S8.
Even with the recent update, the KS Fit app may disappoint anyone who's used to apps from Fitbit or Garmin. Once you open the app, in that location are two primary options: Motion, to start a walk, and Mine, to view your stats. You can await at your stats in aggregate, but you lot won't get the aforementioned level of particular that other apps provide (though sharing data from KS Fit with Google Fit or Apple tree Fitness+ will allow for this).
Ultimately, I used the app primarily as a replacement for the remote control. I wear a Garmin watch on my runs and track my stats on the Garmin app, and I'chiliad not as well concerned well-nigh a few walking treadmill miles not making it into those stats. Just someone simply getting started with an exercise routine may want a more sophisticated app — or, at the very to the lowest degree, to sync with their phone'southward fettle app.
WalkingPad P1 review: Verdict
Having tested both the WalkingPad P1 and the A1Pro, I prefer the P1. Certain, the remote was glitchy and didn't make up for the lack of display on the device. Nonetheless, I didn't really notice the slight downgrade in power, and I was more than happy to use the newly updated KS Fit app to start and finish walks. For me, that's worth saving $200 for a device that I apply to walk a couple days a week when I can't get exterior to exercise it.
Source: https://www.tomsguide.com/reviews/walkingpad-p1
Posted by: browncombou.blogspot.com
0 Response to "WalkingPad P1 Review"
Post a Comment